ComTech: IT Support Stirling
TwitterFacebookGoogle

How to set up a dhcp server on Ubuntu Server 12.04 LTS


Today I will show you how to install and configure a dhcp server on Ubuntu Server 12.04 LTS.

The first thing we need to do is install the packages we need.  Open up a terminal and type:

sudo apt-get install isc-dhcp-server

There are two main files /etc/default/isc-dhcp-server and /etc/dhcp/dhcpd.conf which we will need to configure so lets take the first.  Open up a terminal and using your favourite text editor type:

sudo nano /etc/default/isc-dhcp-server

You should get the following:

———————————————————————————————–

# Defaults for dhcp initscript
# sourced by /etc/init.d/dhcp
# installed at /etc/default/isc-dhcp-server by the maintainer scripts

#
# This is a POSIX shell fragment
#

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
# Separate multiple interfaces with spaces, e.g. “eth0 eth1?.
INTERFACES=”eth0″

————————————————————————————————–

Replace eth0 above with the name of your network interface that you want the server to lease addresses on.

Onto the next file. Open up a terminal and type:

sudo nano /etc/dhcp/dhcpd.conf

which should give you the output below.

————————————————————————————————-

#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages (‘none’, since DHCP v2 didn’t
# have support for DDNS.)
ddns-update-style none;

# option definitions common to all supported networks…
option domain-name “example.org”;
option domain-name-servers ns1.example.org, ns2.example.org;

option domain-name “comtech.com”;
default-lease-time 600;
max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

subnet 10.0.0.0 netmask 255.255.255.0 {
range 10.0.0.150 10.0.0.253;
option routers 10.0.0.2;
option subnet-mask 255.255.255.0;

option broadcast-address 10.0.0.254;
option domain-name-servers 10.0.0.1, 10.0.0.2;

option ntp-servers 10.0.0.1;
option netbios-name-servers 10.0.0.1;
option netbios-node-type 8;
}

# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;

#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don’t really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
# range dynamic-bootp 10.254.239.40 10.254.239.60;
# option broadcast-address 10.254.239.31;
# option routers rtr-239-32-1.example.org;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name “internal.example.org”;
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename “vmunix.passacaglia”;
# server-name “toccata.fugue.com”;
#}

# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}

# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class “foo” {
# match if substring (option vendor-class-identifier, 0, 4) = “SUNW”;
#}

#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of “foo”;
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of “foo”;
# range 10.0.29.10 10.0.29.230;
# }
#}

————————————————————————————————

This needs a little bit of explaining.

1. Everything in bold needs adding to the file.  Adjust your settings according to your network requirements.

2. The option domain name is your dns zone name.  For example mine is set to comtech.com.

3. Range should be the range of ip addresses that you want the server to give out to clients.

Now restart the dhcp service by typing:

sudo service isc-dhcp-server restart

Thats it!! Your dhcp server should be running, however it is best to check.  Open up a terminal and type:

sudo netstat -uap

which will show you the following information:

————————————————————————————————

Active Internet connections (servers and established)

Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name

udp 0 0 *:55827 *:* 916/avahi-daemon: r
udp 0 0 chris-desktop.lo:domain *:* 1273/named
udp 0 0 chris-desktop:domain *:* 1273/named
udp 0 0 *:bootps *:* 4525/dhcpd
udp 0 0 *:17500 *:* 1768/dropbox
udp 0 0 *:54407 *:* 4539/VirtualBox
udp 0 0 10.0.0.255:netbios-ns *:* 1016/nmbd
udp 0 0 chris-deskto:netbios-ns *:* 1016/nmbd
udp 0 0 *:netbios-ns *:* 1016/nmbd
udp 0 0 10.0.0.255:netbios-dgm *:* 1016/nmbd
udp 0 0 chris-deskt:netbios-dgm *:* 1016/nmbd
udp 0 0 *:netbios-dgm *:* 1016/nmbd
udp 0 0 *:mdns *:* 916/avahi-daemon: r
udp6 0 0 [::]:domain [::]:* 1273/named
udp6 0 0 [::]:51853 [::]:* 916/avahi-daemon: r
udp6 0 0 [::]:mdns [::]:* 916/avahi-daemon: r

————————————————————————————————

This shows that the dhcp daemon is working

About the Author

P1020114

Hi I’m Chris Wakefield the owner of ComTech IT Support. I provide Windows, Mac and Linux based IT Support to small businesses in Stirling, Alloa and Falkirk.

Follow @Comtech247 on Twitter

 

 

How to set up a DHCP server on Linux Mint 12


Recently I did a tutorial on setting up a Linux dhcp server using the dhcp3-server package.  With the arrival of Linux Mint 12 the configuration is slightly different so I shall revise the tutorial to show this.

First thing to do is to give your server a static ip address. For details on how to do this read this.

Now we need to install the dhcp package.  Open up a terminal and type:

sudo apt-get install isc-dhcp-server

There are two main files /etc/default/isc-dhcp-server and /etc/dhcp/dhcpd.conf which we will need to configure so lets take the first.  Open up a terminal and using your favourite text editor type:

sudo gedit /etc/default/isc-dhcp-server

You should get the following:

———————————————————————————————–

# Defaults for dhcp initscript
# sourced by /etc/init.d/dhcp
# installed at /etc/default/isc-dhcp-server by the maintainer scripts

#
# This is a POSIX shell fragment
#

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
# Separate multiple interfaces with spaces, e.g. “eth0 eth1”.
INTERFACES=”eth0″

————————————————————————————————–

Replace eth0 above with the name of your network interface that you want the server to lease addresses on.  Onto the next file.  Open up a terminal and type:

sudo gedit /etc/dhcp/dhcpd.conf

which should give you the output below.

————————————————————————————————-

#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages (‘none’, since DHCP v2 didn’t
# have support for DDNS.)
ddns-update-style none;

# option definitions common to all supported networks…
option domain-name “example.org”;
option domain-name-servers ns1.example.org, ns2.example.org;

option domain-name “comtech.com”;
default-lease-time 600;
max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
#authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

# No service will be given on this subnet, but declaring it helps the
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

subnet 10.0.0.0 netmask 255.255.255.0 {
range 10.0.0.150 10.0.0.253;
option routers 10.0.0.2;
option subnet-mask 255.255.255.0;

option broadcast-address 10.0.0.254;
option domain-name-servers 10.0.0.1, 10.0.0.2;

option ntp-servers 10.0.0.1;
option netbios-name-servers 10.0.0.1;
option netbios-node-type 8;
}

# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;

#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don’t really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
# range dynamic-bootp 10.254.239.40 10.254.239.60;
# option broadcast-address 10.254.239.31;
# option routers rtr-239-32-1.example.org;
#}

# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name “internal.example.org”;
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}

# Hosts which require special configuration options can be listed in
# host statements. If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
# hardware ethernet 0:0:c0:5d:bd:95;
# filename “vmunix.passacaglia”;
# server-name “toccata.fugue.com”;
#}

# Fixed IP addresses can also be specified for hosts. These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP. Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
# hardware ethernet 08:00:07:26:c0:a5;
# fixed-address fantasia.fugue.com;
#}

# You can declare a class of clients and then do address allocation
# based on that. The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class “foo” {
# match if substring (option vendor-class-identifier, 0, 4) = “SUNW”;
#}

#shared-network 224-29 {
# subnet 10.17.224.0 netmask 255.255.255.0 {
# option routers rtr-224.example.org;
# }
# subnet 10.0.29.0 netmask 255.255.255.0 {
# option routers rtr-29.example.org;
# }
# pool {
# allow members of “foo”;
# range 10.17.224.10 10.17.224.250;
# }
# pool {
# deny members of “foo”;
# range 10.0.29.10 10.0.29.230;
# }
#}

————————————————————————————————

This needs a little bit of explaining.

1. Everything in bold needs adding to the file.  Adjust your settings according to your network requirements.

2. The option domain name is your dns zone name.  For example mine is set to comtech.com.

3. Range should be the range of ip addresses that you want the server to give out to clients.

Now restart the dhcp service by typing:

sudo service isc-dhcp-server restart

Thats it!! Your dhcp server should be running, however it is best to check.  Open up a terminal and type:

sudo netstat -uap

which will show you the following information:

————————————————————————————————

Active Internet connections (servers and established)

Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name

udp 0 0 *:55827 *:* 916/avahi-daemon: r
udp 0 0 chris-desktop.lo:domain *:* 1273/named
udp 0 0 chris-desktop:domain *:* 1273/named
udp 0 0 *:bootps *:* 4525/dhcpd
udp 0 0 *:17500 *:* 1768/dropbox
udp 0 0 *:54407 *:* 4539/VirtualBox
udp 0 0 10.0.0.255:netbios-ns *:* 1016/nmbd
udp 0 0 chris-deskto:netbios-ns *:* 1016/nmbd
udp 0 0 *:netbios-ns *:* 1016/nmbd
udp 0 0 10.0.0.255:netbios-dgm *:* 1016/nmbd
udp 0 0 chris-deskt:netbios-dgm *:* 1016/nmbd
udp 0 0 *:netbios-dgm *:* 1016/nmbd
udp 0 0 *:mdns *:* 916/avahi-daemon: r
udp6 0 0 [::]:domain [::]:* 1273/named
udp6 0 0 [::]:51853 [::]:* 916/avahi-daemon: r
udp6 0 0 [::]:mdns [::]:* 916/avahi-daemon: r

————————————————————————————————

This shows that the dhcp daemon is working.

About the Author

Hi I am Chris the owner of ComTech. I provide IT Support, Laptop repairs and Computer repairs to both personal and business clients in and around Stirling. For a list of what I can offer you why not visit my website www.comtech247.net where you will find my blog, testimonials, services and much more.  Start supporting a local business today so I can start supporting you.

If you found this blog useful then why not sign up to my RSS Feed for news, tutorials, views and general techie stuff!!

 

Setting up a Linux DHCP server


Today we are going  install and set up a Linux DHCP server.  Linux Mint 9 was used in this tutorial but the steps are identical for the majority of recent distributions.

First thing to do is to give your server a static ip address. For details on how to do this read this.

Now we need to install the dhcp package.  Open up a terminal and type:

sudo apt-get install dhcp3-server

There are two main files /etc/default/dhcp3-server and /etc/dhcp3/dhcpd.conf which we will need to configure so lets take the first.  Open up a terminal and using your favourite text editor type:

sudo gedit /etc/default/dhcp3-server

You should get the following:

———————————————————————————————–

# Defaults for dhcp initscript
# sourced by /etc/init.d/dhcp
# installed at /etc/default/dhcp3-server by the maintainer scripts

#
# This is a POSIX shell fragment
#

# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
#    Separate multiple interfaces with spaces, e.g. “eth0 eth1”.
INTERFACES=”eth0″

————————————————————————————————–

Replace eth0 above with the name of your network interface that you want the server to lease addresses on.  Onto the next file.  Open up a terminal and type:

sudo gedit /etc/dhcp3/dhcdp.conf

which should give you the output below.

————————————————————————————————-

#
#   DHCP Server Config File
#
ddns-update-style none;
ignore client-updates;

lease-file-name “/var/lib/dhcp3/dhcp.leases”;
authoritative;

option domain-name                      “comtech.com”;
default-lease-time                     600;
max-lease-time                         7200;

subnet 192.168.1.0 netmask 255.255.255.0 {
option routers                  192.168.1.1;
option subnet-mask              255.255.255.0;

option broadcast-address        192.168.1.255;
option domain-name-servers      192.168.1.4, 192.168.1.1;

option ntp-servers              192.168.1.4;
option netbios-name-servers     192.168.1.4;
option netbios-node-type        8;
range   192.168.1.10   192.168.1.200;
}

————————————————————————————————-

This needs a little bit of explaining.

1. The dhcp.lease file is where all the leases given out by the server will be stored.  Make sure this is /var/lib/dhcp3/dhcp.leases.

2. The option domain name is your dns zone name.  For example mine is set to comtech.com.

3. Range should be the range of ip addresses that you want the server to give out to clients.

Using the above output as a guide modify your file accordingly.  Next thing to do is actually create the dhcp.lease file.  In your terminal type:

sudo touch /var/lib/dhcp3/dhcp.leases

Now restart the dhcp service by typing:

sudo service dhcp3-server restart

Thats it!! Your dhcp server should be running, however it is best to check.  Open up a terminal and type:

sudo netstat -uap

which will show you the following information:

————————————————————————————————

Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
udp        0      0 chris-server.loc:domain *:*                                 1072/named
udp        0      0 localhost:domain        *:*                                 1072/named
udp        0      0 *:bootps                *:*                                 1829/dhcpd3
udp        0      0 *:mdns                  *:*                                 625/avahi-daemon: r
udp        0      0 *:35246                 *:*                                 625/avahi-daemon: r
udp6       0      0 [::]:domain             [::]:*                              1072/named

————————————————————————————————

This shows that the dhcp daemon is working.

About the Author

Hi I am Chris the owner of ComTech. I provide IT Support, Laptop repairs and Computer repairs to both personal and business clients in and around Stirling. For a list of what I can offer you why not visit my website www.comtech247.net where you will find my blog, testimonials, services and much more.  Start supporting a local business today so I can start supporting you.

If you found this blog useful then why not sign up to my RSS Feed for news, tutorials, views and general techie stuff!!

 

 

CyberChimps
Follow

Get every new post delivered to your Inbox

Join other followers

WordPress SEO fine-tune by Meta SEO Pack from Poradnik Webmastera
WP Like Button Plugin by Free WordPress Templates